Chris Kjelgaard

As of June, all new-production CFM International Leap-1A and Leap-1B engines delivered to Airbus and Boeing incorporate the permanent ceramic matrix composite (CMC) fix developed by CFM International. The fix mitigates an environmental barrier coating degradation issue that affected the CMC shroud surrounding the first high-pressure turbine stage of in-service examples, according to Gaël Méheust, president and CEO of the CFM joint venture.

 


Stressing that the CMC environmental barrier coating premature-loss problem has never represented a safety issue for any Leap engine, Méheust told AIN that, nonetheless, it has affected adversely the time on wing many in-service engines have been able to achieve. Loss of the coating reduces the amount of exhaust gas temperature (EGT) margin available to Leap engines, affecting their performance levels at high thrust settings. This lead to operators sending engines prematurely for performance-restoration maintenance shop visits after only a few thousand hours’ time on-wing.

 


Méheust said the coating degradation problem “is manifested after several thousand hours [in service] and is impacting both [Leap-1A and Leap-1B] models.” However, while by late June operators had sent about 70 engines to CFM and its MRO partners for premature performance-restoration work, all engines removed by that date had been Leap-1As installed on Airbus A320neos, he confirmed. The Leap-1A-powered A320neo entered commercial service in late summer 2016, on an aircraft operated by Turkish carrier Pegasus Airlines. This was at least eight months before the first Leap-1B-powered Boeing 737, a 737 Max 8 operated by Malaysian carrier Malindo Air, entered commercial service on May 22, 2017.

 


Once CFM became aware of the problem, it acted quickly to provide a temporary fix, according to Méheust. The fix relied on the fact that the designs of the two Leap models “had available extra EGT margin” which CFM knew about from testing but hadn’t yet made available to operators. So CFM engineers “were able to restore 25 degrees of EGT margin through a service bulletin,” which instructed Leap operators to implement a Fadec software upgrade that immediately provided them with some additional time-on-wing flexibility.

 


“This is very important, because it gives us the time to organize the return of engines to the shop” and deliver spare engines to operators before any operator needs to ground any aircraft as a result of having to remove prematurely a Leap which doesn’t have enough EGT margin available to continue operating, said Méheust. The additional time-on-wing flexibility has allowed CFM and operators to organize Leap removals and replacements without any aircraft on ground emergencies occurring.

 


“We don’t want any and we haven’t had any,” said Méheust. “We have special teams that do nothing but deal with the airlines and monitor their engine performance.” In addition, “we are doing quick [MRO] turn times to get these engines back” into service rapidly.

 


With the temporary fix in place, CFM developed a permanent fix for the coating-degradation problem by changing the bonding material it had used to bond the environmental barrier coating to the surface of the CMC shroud segments. (The coating is required because the silicon carbide fiber/silicon carbide matrix CMC parts are adversely affected by water vapor in the exhaust gas flowing from the combustor.) “The fix was introduced in June into the production lines,” said Méheust.

 


Having the permanent fix in place is particularly important “because we see more and more that airlines are using [Leap-powered] A321neos and 737 Maxs on longer legs, exceeding eight hours,” he said. As a result, the Leap engines on these aircraft are rapidly accumulating substantial amounts of flight hours and providing CFM with lots of operational performance data. “We are very positive that Leap has the best-in-class performance … [and] the longer the leg, the better the fuel-burn improvement,” he said.

News and developments about aircraft engines, including turbofan, turboprop, turboshaft and piston.

CFM Fixes Leap Turbine Shroud Coatings 

CFM began delivering new Leap engines with the permanent CMC environmental-barrier coating fix in June.

2024 Corporate Aviation Leadership Summit

Charles Alcock

News and developments about aviation fuel, including jet fuel, aviation gasoline, and biofuel.

Companies signed a new memorandum of understanding to expand their collaboration

ZeroAvia and PowerCell Agree To Scale Up Fuel Cell Partnership

News and issues about aviation maintenance, repair and overhaul (MRO), covering all segments of the aviation industry; and modifications for aircraft and engines. Subjects include product support of aircraft, engines and avionics, MRO company mergers, acquisitions, announcements and personnel, Airworthiness Directives, Supplemental Type Certificate approvals and other topics.

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

A new hangar in Indianapolis and better access to engine data are boosting the CorporateCare program

Rolls-Royce Expands Capacity and Predictability in Engine Support

Jessica Reed

The solution provides automated data reporting for business jet turbofan engines

Honeywell Ensemble Offers Real-time Engine Monitoring

News about environmental issues relating to aircraft operations, including noise issues, emissisions, and regulations. See Fuel for biofuel.

Norway's Skydive Voss, Dovetail Electric Aviation and Scandinavian Seaplanes will conduct flight tests

Skydiving Operator Commits to Electric Caravan Aircraft

Hanneke Weitering

Superconductors could make hydrogen-powered airliners more efficient

Toshiba and Airbus Jointly Develop Superconducting Electric Motors 

Turbofan flew more than 36,000 nm fitted to the engine maker's Boeing 747 testbed aircraft

Rolls-Royce Completes Pearl 10X Engine Flight Testing

Matt Thurber

Readers rate business aviation engine OEMs' aftermarket support

AIN Product Support Survey 2024: Engines

News about bills, laws, regulations and other governmental decisions affecting aviation and aerospace. Topics include FAA re-authorizations, taxes on fuel and aviation activities, environmental legislation, ICAO decisions, governmental mediation of labor conflicts and World Trade Organization disputes and decisions.

2018 Farnborough Airshow

More In Engines