A lifelong aviation enthusiast who joined&nbsp;AIN&nbsp;in 2007, Curt came to&nbsp;the publication&nbsp;from the broadcast industry where he was a national science and technology television reporter and producer. He writes on the FBO field, aviation finance, and sustainable aviation and occasionally contributes to&nbsp;AIN&nbsp;sister publication&nbsp;Business Jet Traveler. Curt was a member of the AINtv reporting staff that won the 2008 Aerospace Journalist of the Year award for Best Airshow Daily. That same year, he was a finalist for another AJOYA award. He earned an AJOYA for Best Business Aviation Submission in 2018 and was a finalist in that category in 2021. He received the National Air Transportation Association’s&nbsp; Aviation Journalist Award in 2012 and won a Pegasus Sapphire Business Aviation Award for outstanding journalism in 2021.
Before joining AIN, Curt worked with&nbsp;Consumer Reports’ television division, CRTV, and for several local television news staffs. An honors graduate of the State University of New York at Stony Brook, he earned a master’s degree in broadcast journalism from Boston University in 1995. Curt lives in New York State with his wife and two young sons.

Senior Editor

Curt Epstein

Schweizer Helicopter has had a busy year, according to CEO David Horton. Last March, the light helicopter manufacturer received its unlimited production certificate from the FAA, which supplanted the limited production certificate it received in August 2020.&nbsp;This authorization allows the Fort Worth-based OEM full production of the S300C and S300CBi piston-powered helicopters without FAA oversight of each aircraft.
Additionally, the manufacturer has received approval for a crash-resistant fuel system STC in response to Special Airworthiness Information Bulletin (SAIB) SW-17-31R1. The first installation on a new-production Schweizer will take place by April and it is retrofittable. This approval also allows the company to resume U.S. sales of its helicopters.
After Schweizer was <a href="https://www.ainonline.com/aviation-news/business-aviation/2018-01-26/sikorsky-sells-schweizer-s-300-helicopter-line">acquired from Sikorsky</a> in 2018, the company has worked to restart its production line for the venerable helicopter. Horton noted that it has delivered a dozen helicopters since 2021 and has several in its backlog. One of Schweizer’s goals this year is to expand its global sales force to strengthen its order book.
The airframer is also taking steps to improve the manufacturability of its parts. “When the helicopter was designed and built in the 1950s and 1960s, the manufacturing capability was limited and therefore you used a lot of castings in the production of these helicopters,” explained Horton. “We want to move away from castings as we can and go to machined parts,” which have lower lead times and would ultimately lower end costs for the customer.
It is also developing a digital flat-panel instrument display, which the company said will reduce weight by up to 15 pounds.
Schweizer has also worked to address what it describes as its customers' number-one concern: spare parts. Over the past four years, the company restarted its supply chain and invested $15 million in parts and tooling.
Horton noted that the OEM today has parts on its shelves to fill 90 percent of all orders when received. “We’re maybe not at the apex where we feel like it's 100 percent covered all the time, but we feel really good about where we are at with regards to supporting the fleet and having spare parts.”
To bolster its worldwide service network, the company authorized three new locations: HeliEast in Poland, Heli Holland in the Netherlands, and the UK’s Unionlet, which also has a track record of helicopter supply and support in Africa.
In November, the company <a href="https://www.ainonline.com/aviation-news/business-aviation/2023-11-17/schweizer-completes-first-oem-certified-helicopter">completed the first example</a> in its OEM Certified Helicopter Program, which was established to bring new life to existing Schweizer airframes. The program comes in two levels, the first being 'Refresh,' which includes ensuring all life-limited components have at least 50 percent of their remaining time, at least 60 percent life remaining on the engine, all required inspections and repairs, overhauled landing gear dampers, new cabin and door Plexiglas, and touch-up paint.
The second level is "refurbish," which involves disassembling the entire helicopter and providing a more extensive slate of repairs such as new interior, Plexiglas, wiring, &nbsp;main and tail rotor blades, and hoses, as well as a factory-fresh or overhauled engine and cleaned and certified oil coolers. It is also stripped and repainted inside and out, and comes with a one-year, 1,000-hour warranty.
“When you buy a used helicopter, you are always taking some level of risk,” Horton told reporters during a Heli-Expo press conference. “Our intention of doing this is to take a lot of that risk out of buying a used helicopter.”
Thus far, he said the Fort Worth-based company has delivered four renovated Schweizers. With between 1,200 and 1,500 active helicopters in the company’s worldwide fleet, which has tallied more than 17 million flight hours, Horton believes there is an ample supply of potential airframes for the upgrade program.
The company also partnered with an insurance company to establish a dedicated coverage program offering prenegotiated rates and benefits unavailable to other piston helicopter manufacturers.
Looking ahead, Horton sees a path to bringing back the turbine-powered Schweizer 333.
“We still believe there is a future for the triple three. I believe in the next 18 months we will secure an order big enough to where we can start production. That will be our next big undertaking.”
Further on the horizon is the 444, a rendering of which Horton showed on Tuesday at the show. While he acknowledged that the aircraft—in the absence of development funding—is just a paper design, it serves a vital role.
“I think for any company, having something that you can push for to the future is really a great thing,” concluded Horton. “If you’re not really driving towards something, what are you doing?”

News and issues regarding all manner of civil and military rotorcraft and their powerplants, including helicopters, tilt rotors and unmanned air vehicles.

Schweizer Looks to Future as It Continues To Rebuild

With new manufacturing certifications in place, the OEM looks to ramp up production and support

Schweizer Helicopter, which was nearly eliminated during its former ownership by Sikorsky, has had a busy year, according to CEO David Horton.

Schweizer Looks to Future, Continues To Rebuild

2024 Corporate Aviation Leadership Summit

Mark Huber

News about significant aircraft accidents and information from accident reports.

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

Jury awards $116 million for doors-off crash victim

FlyNYON Tragedy Results in Hefty Jury Award

Matt Thurber

News and issues about aviation maintenance, repair and overhaul (MRO), covering all segments of the aviation industry; and modifications for aircraft and engines. Subjects include product support of aircraft, engines and avionics, MRO company mergers, acquisitions, announcements and personnel, Airworthiness Directives, Supplemental Type Certificate approvals and other topics.

Upgrade is available at MD Helicopters service centers

First MD500E to MD530F Helicopter Conversion Done

Chad Trautvetter

Commercial shipments nearly doubled, while new military program brought in more than $80M

Bell Soars in 3Q with Higher Civil Helo Deliveries, FLRAA

Charles Alcock

Japan General Aviation Service is already a customer for the larger 429 model

Bell Appoints Japanese Dealer for 505 Helicopter

Plan will help ensure long-term job stability for Portugal workforce

Avincis Strengthens Portugal Helicopter MRO Base

News and issues concerning the aviation charter and fractional-ownership industries and markets, including company announcements, regulations, new developments and labor issues.

Heli-Expo 2024

In this article

Schweizer

More In Rotorcraft

FlyNYON Tragedy Results in Hefty Jury Award

Jury awards $116 million for doors-off crash victim

First MD500E to MD530F Helicopter Conversion Done

Upgrade is available at MD Helicopters service centers

Bell Soars in 3Q with Higher Civil Helo Deliveries, FLRAA

Commercial shipments nearly doubled, while new military program brought in more than $80M

Bell Appoints Japanese Dealer for 505 Helicopter

Japan General Aviation Service is already a customer for the larger 429 model

Avincis Strengthens Portugal Helicopter MRO Base

Plan will help ensure long-term job stability for Portugal workforce

PHI Adds H175s to Australian Energy Support Fleet

Twin-engine aircraft will be based at Broome in Western Australia

Onboard Talon Dual Cargo Hook Approved in Bell 429

Kits are retrofittable to 429s with existing single- or dual-hook systems

Operators Enrolling in VAI Risk Accreditation Program

ORRA encourages helicopter companies to go beyond traditional risk management

AIN Products

SUBSCRIPTIONS

RESOURCES

ABOUT AIN